Chevrolet 1988 Light Duty Truck Repair Manual page 131

Figure 32 — Removing the Fitting, Control Valve,
Spring and Seal
E. N ote the p o sitio n
17. Drive S haft
19. R etaining Ring
Figure 33— Remove and Install Retaining Ring
• Use a s u ita b le so cke t to press seal into
housing until it bottoms (figure 35).
16. Bearing (18) onto the driveshaft (17) (figure 34).
F. Press
G. S upport Ring
17. Drive Shaft
18. Bearing
Figure 3 4 — Remove and Install Driveshaft Bearing
o f the large lug.
F-01879
G
F-01880
POWER STEERING 3B3-17
• Slide the assem bly into the housing while
ro ta tin g th e d riv e s h a ft so th a t the s h a ft
serrations engage with the rotor.
17. Retaining ring (19). Use a suitable pair of snap ring
pliers (figure 33).
F. Press
K. Bar Stock
13. T hrust Plate
14. T hru st Plate
R etaining Ring
Figure 37— Removing the Thrust Plate
F-02151