4B7-6 LOCKING DIFFERENTIALS
31. D iffe re ntia l Case Halves
32. Screw
33. Cam Plate
34. G uide C lip
35. T h ru st Sleeve
36. Side Gear T h ru st W asher
ADJUSTMENT OF THE DIFFERENTIAL
• If it is necessary to replace the cam gear, the right
hand side gear, or the reaction blocks, the entire
differential must be adjusted. The differential is
adjusted by using selective thickness thrust washers
37.
Plates
Pinion T hru st W asher
38.
Pinion Gear
39.
Side Cam Gear
40.
R eaction B lock
41.
42.
Pinion Yoke
Figure 9— Differential Com ponents
behind each side gear, and selective thickness
reaction blocks between the side gears.
• It is im portant to build up the differential properly.
The proper clearance between parts is necessary
for the proper operation of the unit.
Figure 10— Differential Case Halves
34
43. G overnor and Latch ing Bracket
44. Plates
45. Side Gear T h ru st W asher
46. Side Gear
47. G uide C lip
48. G overnor
35 36
F-05915