Toshiba RAV-SM563UT-E Service Manual page 150

RAV-SP1102AT-E, RAV-SP1402AT-E
No. Part name

Common
procedure
1. Detachment
1) Stop operation of the air conditioner, and
2) Remove the front panel.
3) Remove the power cable and the indoor/
4) Remove the roof plate.
2. Attachment
1) Mount the roof plate.
2) Connect the power cable and the indoor/
3) Attach the front panel.
Procedure
REQUIREMENT
Before works, put on gloves, otherwise an
injury may be caused by parts, etc.
turn off switch of the breaker.
(ST1T Ø4 × 10, 3 pcs.)
• After removing the screws, remove the
front panel while drawing it downward.
outdoor connecting cable from cord clamp
and terminal.
(ST1T Ø4 × 10, 6 pcs.)
(ST1T Ø4 × 10, 6 pcs.)
outdoor connecting cable to terminal, and
then fix them with cord clamp.
REQUIREMENT
Be sure to fix the power cable and the
indoor/outdoor connecting cable with
bundling band on the market along the
inter-unit cable so that they do not come
to contact with the compressor, the valve
and the cable at gas side, and the dis-
charge pipe.
(ST1T Ø4 × 10, 3 pcs.)
– 150 –
Remarks
Front panel
Roof plate