Toshiba RAV-SM563UT-E Service Manual page 135

No. Part name
‚
1. Detachment
Front cabinet
1) Perform work of item 1 of
2) Remove screws (ST1T Ø4 × 10L, 2 pcs.)
3) Take off screws of the front cabinet and
4) Take off screws of the front cabinet and
3. Attachment
1) Insert hook at the left side of the front side
2) Hook the lower part at the right side of the
3) Attach the removed screws to the original
Procedure
of the front cabinet and the inverter cover.
the bottom plate. (ST1T Ø4 × 10L 3 pcs.)
the motor support.
(ST1T Ø4 × 10L, 2 pcs.)
• The left side of the front side if made to
insert to the rear cabinet, so remove it
pulling upward.
into the rear cabinet.
front to concavity of the bottom plate.
Insert the hook of the rear cabinet into the
slit of the front cabinet.
positions.

.
Front cabinet
Slit
Hook
Lower
– 135 –
Remarks
Motor support
For single-phase type models,
also take off this screw
Front cabinet (Left side)
Slit
Cord clamp
Front cabinet
slit
Claw
Concavity at
bottom plate