Toshiba RAV-SM563UT-E Service Manual page 142

No. Part name
‚
1. Detachment
Discharge port
cabinet
1) Perform work of item 1 of
2) Take off screws (ST1T Ø4 × 10L, 3 pcs.)
3) Take off screws (ST1T Ø4 × 10L, 2 pcs.)
4) Take off screw (ST1T Ø4 × 10L, 1 pc.) of
5) Take off screws (ST1T Ø4 × 10L, 2 pcs.)
2. Attachment
1) Put the upper left side of the discharge
2) Attach the removed screws to the original
ƒ
Side cabinet 1) Perform work of item 1 of
2) Remove screw fixing the inverter and the
3) Remove screws of the side cabinet and
4) Remove screw of the side cabinet and the
5) Remove screw of the side cabinet and the
6) Remove screw of the side cabinet and the
Procedure
of discharge port cabinet for the partition
plate.
of discharge port cabinet for the bottom
plate.
discharge port cabinet for the heat
exchanger.
of discharge port cabinet for the fin guard.
port cabinet on the end plate of the heat
exchanger, and then fix it with screw.
(ST1T Ø4 × 10L, 1 pc.)
positions.
side cabinet. (ST1T Ø4 × 10, 1 pc.)
the valve support plate.
(ST1T Ø4 × 10, 2 pcs.)
cabling panel (Rear).
(ST1T Ø4 × 10, 1 pc.)
bottom plate. (ST1T Ø4 × 10, 1 pc.)
fin guard (Heat exchanger).
(ST1T Ø4 × 10, 2 pcs.)

.
End plate of the
heat exchanger

.
Valve support plate
– 142 –
Remarks
Side cabinet
Inverter
Fin guard
Discharge port
Side cabinet
Inverter
Side cabinet
Valve support
Cabling panel
plate
(Rear)