Toshiba RAV-SM563UT-E Service Manual page 138

No. Part name
…
Rear cabinet 1) Perform works of items 1 of
2) Take off fixed screws for the bottom plate.
3) Take off fixed screws for the heat ex-
4) Take off fixed screw for the valve mounting
†
Fan motor 1) Perform works of items 1 of
2) Take off the flange nut fixing the fan motor
3) Remove the propeller fan.
4) Disconnect the connector for fan motor
5) Take off the fixing screws (3 pcs.) holding
NOTE:
Tighten the flange nut with torque 4.9Nm
(50kgf/cm).
Procedure
(ST1T Ø4 × 10L, 3 pcs.)
changer. (ST1T Ø4 × 10L, 2 pcs.)
plate. (ST1T Ø4 × 10L, 1 pc.)
and the propeller.
• Turning it clockwise, the flange nut can
be loosened.
(To tighten the flange nut, turn counter-
clockwise.)
from the inverter.
by hands so that the fan motor does not
fall.
 ‚ ƒ
and , .
 ‚
and .
Flange nut
Fan
motor
– 138 –
Remarks
Rear cabinet
Loosen the nut by
turning clockwise
Propeller fan