If menu item Open is set in the Phone - Wi-Fi - Settings - Encryption menu, the
connection is made automatically.
Connecting using WPS (service for easy connection)
›
Switch on the Wi-Fi network
» page
›
Open the Phone - Wi-Fi - WPS config. menu in the instrument cluster.
›
In the device to be connected, select the connection using WPS function - see
operating instructions for the device to be connected.
If the Pushbutton menu item is selected in the instrument cluster, the Wi-Fi con-
nection is made automatically.
If the WPS PIN menu item is selected in the instrument cluster, then a PIN must
be entered in the device to be connected and the instrument cluster.
Use WLAN network in MAXI DOT display
First read and observe the introductory information given on page 109.
When a Wi-Fi network is switched on, the following menu items are displayed
when the Wi-Fi menu item is selected:
Off - Switch off the WLAN network (depending on the context)
■
Device list - Display a list of external devices
■
■
Active device - Display a list of active devices
Block - Block device connections
■
Known devices - Display a list of known devices
■
■
Rename - Rename the device
Block - Block device connections
■
Device blocked - Display of a list of blocked devices
■
■
Unblock - Remove the connection block
Delete lists - Delete device lists
■
Known devices - Delete the list of known devices
■
Device blocked - Delete the list of blocked devices
■
Both lists - Delete both device lists
■
Password - Use of password to log on to the WLAN network
■
Show - Display a password to log on to the WLAN network
■
■
Generate - Generate a new password to log on to the WLAN network
Wi-Fi Name - Use of WLAN network name
■
Show - Display the WLAN network name
■
■
Rename - Rename the WLAN network
110
Using the system
109, Switching Wi-Fi network on/off.
WPS config. - Wi-Fi network connection using WPS
■
Pushbutton - Automatic connection
■
WPS PIN - PIN entry for the connection
■
Data counter - Display information about the volume of data transferred
■
Current conn. - Display of the volume of data transferred for the current con-
■
nection
Total - Display of the total volume of data transferred
■
Reset - Resetting of the information about the volume of data transferred
■
■
Settings - WLAN network settings
Access point - Access point settings
■
Settings - Access point management
■
■
APN - Change the access point name
User name - User Name
■
Password - Password
■
■
Reset - Reset access point factory settings
Prioritisation - Set the connection priority
■
Calls - Set the connection priority for calls
■
■
Data - Set the connection priority for data transfer
Encryption- Set the encryption
■
WPA2 - Enable WPA 2 encryption
■
■
Open - No encryption
Visibility - Set the WLAN network visibility
■
Visible - WLAN network is visible to other devices
■
■
Invisible - WLAN network is not visible to other devices
Data roaming - Set the data roaming
■
No roaming - Data roaming is not allowed
■
Allow - Data roaming is allowed
■
Always ask - Question setting for data roaming
■
Wi-Fi Channel - Select WLAN network channels (preferably set to channel 11)
■
Channel 1 ... Channel 11 - Display the WLAN network channels
■
■
Reset - Reset Wi-Fi network factory settings
Voice control
Introduction
This chapter contains information on the following subjects:
Dialogue
Voice commands - GSM II
Voice commands - GSM III
111
112
112