Skoda Yeti Owner's Manual page 130

Modes and use of selector lever
Fig. 110 Selection lever / lock button / display

First read and observe the introductory information and safety warn-
ings on page 126.
When the ignition is switched on, the gearbox mode and the currently selected
gear are indicated in the display » Fig.
The following modes can be selected with the selector lever
– Parking mode
P
The driven wheels are locked mechanically in this mode.
The parking mode must only be selected when the vehicle is stationary.
- Reverse gear
R
Reverse gear can only be engaged when the vehicle is stationary and the engine
is at idling speed.
Before moving into mode R from mode P or N, depress the brake pedal while si-
multaneously pressing the lock button in arrow direction
- Neutral
N
The power transmission to the drive wheels is interrupted in this mode.
- Mode for forwards travel (normal programme)
D
In mode D, the forward gears are automatically changed according to the engine
load, accelerator pedal actuation and driving speed.
- Mode for forwards travel (sports programme)
S
In mode S , the forward gears are shifted automatically up and down at higher
engine speeds than in mode D.
110.
» Fig. 110.
» Fig. 110 .
1
Before changing to mode S from mode D, press the lock button in arrow direction
» Fig. 110.
1
Releasing selector lever from mode P or N (selector lever lock)
The selector lever is locked in mode P and N to prevent that the forward driving is
selected accidentally, thereby setting the vehicle in motion. The indicator light
» page 22 illuminates in the instrument cluster.

The selector lever is released by depressing the brake pedal while simultaneously
pressing the lock button in arrow direction
The selector lever is not locked when quickly moving via position N (e.g. from R to
D). This, for example, helps to rock out a vehicle that is stuck, e.g. in a bank of
snow. The selector lever lock will click into place if the lever is in the position N
for more than approx. 2 seconds without the brake pedal being depressed.
The selector lever is locked only when the vehicle is stationary and at speeds up
to 5 km/h.
Note
If you want to move the selector lever from mode P to mode D or vice versa, move
the selector lever quickly. This prevents that you accidentally select mode R or N.
Manual shifting of gears (Tiptronic)

First read and observe the introductory information and safety warn-
ings on page 126.
Tiptronic mode makes it possible to manually shift gears on the selector lever.
This mode can be selected both while stopping and while driving.
The currently selected gear is indicated in the display
» Fig. 110 .
1
Fig. 111
Selector lever
» Fig. 110 on page 127 .
127
Starting-off and Driving

