Front Armrest - Skoda Yeti Owner's Manual

Hide thumbs Also See for Yeti:
Table of Contents

Advertisement

The seat heating can only be switched on when the engine is running.
Press the surfaces of the controller in the area of the symbol  or 
Pressing once switches the seat heating on at its maximum level - Level 3.
With repeated pressing of the switch, the intensity of the heating is down-regula-
ted up to the switch-off.
The intensity of the heating is indicated by the number of illuminated indicator
lights in the switch.
WARNING
If, as an occupant, you have a subdued pain and/or temperature sensitivity,
e.g. through medication, paralysis or because of chronic illness (e.g. diabetes),
we recommend not to use the seat heating. This can lead to burns on the
back, the posterior and the legs which are difficult to heal. If the seat heating
is used, we recommend to make regular breaks in your journey when driving
long distances, so that the body can recuperate from the stress of the jour-
ney. Please consult your doctor, who can evaluate your specific condition.
CAUTION
Do not kneel on the seats or otherwise apply concentrated pressure to them.
Do not turn on the seat heater if seats are not occupied.
Do not switch on the seat heating if the seats have objects attached to or
placed on them, for example a child seat, a bag, etc. A fault of the heating ele-
ments in the seat heating can occur.
If additional seat covers or protective covers are attached to the seats, do not
turn on the seat heater - there is a risk of damaging the seat covers and seat
heating.
Do not clean the seats using moisture
Note
If the on-board voltage drops, the seat heating is switched off automatically, in
order to provide sufficient electrical energy for the engine control
Automatic load deactivation.
» Fig.
» page
194.
» page
210,

Front armrest

43.
First read and observe the introductory information given on page 64.
The armrest is adjustable for height and length.
Setting the height
First of all fold the cover downwards and then lift it in the direction of the arrow
» Fig. 44
to one of the 4 fixed positions.
1
Move
Move the cover into the desired position in the direction of the arrow
» Fig.
44.
2
The armrest includes a storage compartment underneath
Note
Push the armrest cover all the way back to the stop before applying the hand-
brake.
Fig. 44
Adjust armrest
» page
76.
65
Seats and useful equipment

Advertisement

Table of Contents
loading

Table of Contents