Table of Contents
Advertisement
Adjusting seats in crosswise direction
›
Remove the middle seat
» page
69, Unlocking and removing seats.
›
Fold the outer seat forward
» page 68
›
Move the folded forward and unlocked seat on the guide towards the middle of
the vehicle up to the stop.
›
Lock the folded forward seat by pressing the seat locks
53.
Folding back into the starting position is accomplished in the reverse order.
Folding seats back into the initial position
70
Using the system
Fig. 53
Locking seats
and unlock
» Fig. 52
on page 69.
in the direction of
A
Fig. 54
Folding the seat backrest back
into position
First read and observe the introductory information given on page 67.
›
If the seat has been removed, first position it on the guide and lock it in place
using seat locking
» Fig. 53
A
the seat is locked correctly.
›
Fold the seat in the horizontal position until it can be heard to click. Check for
yourself that the seat can no longer be lifted by pulling it up.
›
yourself that the seat backrest is engaged by pulling on it.
›
Remove the tongue of the lock from the safety position.
WARNING
The belt locks must be in their original position after folding back the seat
■
cushions and backrests - they must be ready to use.
The seat backrests must be securely engaged so that objects from the boot
■
cannot slip into the passenger compartment on sudden braking - risk of in-
jury!
When folding the seat backrest always make sure that it has safely locked
■
into position, this is confirmed by the position and a visible marking on the
cover of the lever.
Practical equipment
Introduction
This chapter contains information on the following subjects:
on page 70 . Pull the seat upwards to ensure that
» Fig. 54
and fold back the seat. Check for
71
71
72
72
73
74
74
75
76
76
77
Advertisement
Chapters
Table of Contents
