Removing the ashtray from the low centre console
›
Place the ashtray insert into the console and press it in.
Opening the ashtray on the high centre console
›
Press on the top part of the ashtray cover in area
Removing the ashtray from the high centre console
›
Carefully push the ashtray cover downwards as far as the stop.
›
Grasp the ashtray insert in the area of the arrows
Inserting the ashtray into the high centre console
›
Place the ashtray insert in the mount and press it in.
WARNING
Never place flammable objects in the ashtray – risk of fire!
CAUTION
When removing the ash tray, do not hold it on the cover on the front – risk of
■
breakage.
The ashtray in the rear part of the central console must be closed (otherwise it
■
could get damaged) before folding forward the rear middle seat.
12-volt power outlet
Fig. 64 12 -volt socket in the front central console/ in the luggage compart-
ment
» Fig.
63.
C
» Fig. 63
and remove.
First read and observe the introductory information and safety warn-
ings
on page 70.
Overview of the 12-volt power socket
In the front centre console
» Fig. 64
In the boot
» Fig. 64
- .
Use of the 12-volt power socket
›
Remove the cover on the power socket
power socket as appropriate
» Fig. 64
›
Connect the plug for the electrical appliance to the socket.
The 12-volt power sockets and any connected appliances can also be operated
when the ignition is switched off or the ignition key is withdrawn
Further information
» page
184, Service work, adjustments and technical altera-
tions.
WARNING
Improper use of the power sockets and the electrical accessories can cause
■
fires, burns and other serious injuries.
Never leave children unattended in the vehicle.
■
If the connected electric device becomes too hot, switch it off and discon-
■
nect it from the power supply immediately.
CAUTION
The power socket can only be used for connecting approved electrical accesso-
■
ries with a total power uptake of up to 120 watt.
Never exceed the maximum power consumption, otherwise the vehicle's elec-
■
trical system can be damaged.
Connecting appliances when the engine is not running will drain the battery of
■
the vehicle!
Only use matching plugs to avoid damaging the power sockets.
■
Only use accessories that have been tested for electromagnetic compatibility in
■
accordance with the applicable directives.
Switch off the devices connected to the power sockets before you switch the
■
ignition on or off and before starting the engine, to avoid damage from voltage
fluctuations.
Observe the operating instructions for the connected devices!
■
- .
» Fig. 64
- or open the cover on the
- .
»
.
Seats and useful equipment
75