›
Set the access point in the Phone - Settings - Access point menu (depending
on the operator, usually "Internet").
›
Switch on the visibility of the hands-free system for other devices in the Phone
- Bluetooth - Visibility menu.
›
Use the device that is to be connected to search for available Bluetooth
ces.
›
Select the hands-free system (as standard "SKODA_BT") from the list of found
devices.
›
Enter the password on the device being connected and follow any instructions
given on this device or in the MAXI DOTdisplay.
›
Enter the desired Internet address in the Internet browser. The operating sys-
tem requests the entry of the telephone number for the internet access (de-
pending on the operator, usually "*99#").
Wi-Fi
Introduction
This chapter contains information on the following subjects:
Switching Wi-Fi network on/off
Connecting an external device to the WLAN network
Use WLAN network in MAXI DOT display
WLAN (also Wi-Fi) is a wireless network for connecting to the Internet.
Using a mobile phone connected with the universal telephone preparation GSM III
via the rSAP profile, it is possible to establish a Wi-Fi network in the vehicle and
to enable passengers with compatible devices to connect to this network.
Switching Wi-Fi network on/off
First read and observe the introductory information given on page 109.
Switching on
›
Connect the mobile phone with the universal telephone preparation GSM III via
the rSAP profile
» page
106.
1)
The name of the access point is defined by the mobile operator.
›
Select the Wi-Fi menu item in the Phone menu.
The display shows the message Swith on Wi-Fi??
›
Select the Yes menu item.
®
devi-
If no access point
is assigned automatically, then this must be entered manually
1)
as per the instructions from the mobile network operator, e.g. "Internet".
If the Wi-Fi network is switched on, the display will show the following message,
for example: WLAN SK_WLAN 1234 switched on.
The display then shows a password for the Wi-Fi network connection. The pass-
word can subsequently be found in the Phone - Wi-Fi - Password - Show menu.
If no data connection via WLAN is available, the display will show the message
Data connection not available.. This can be caused by a weak GSM signal, for ex-
ample. Try to establish the connection again at a location with stronger signal re-
ception.
Switching off
›
Select the Wi-Fi - Off menu item in the Phone menu.
The display shows the message Switch off Wi-Fi?
›
Select the OK menu item.
109
The display shows the message Wi-Fi switch off.
109
110
Connecting an external device to the WLAN network
First read and observe the introductory information given on page 109.
Connecting using the Wi-Fi network search
›
Switch on the Wi-Fi network
›
On the device to be connected, search for available WLAN networks (Wi-Fi) - see
operating instructions for the device to be connected.
›
Select the appropriate Wi-Fi network connection in the menu of the networks
found (e.g. Wi-Fi SK_WLAN 1234).
If menu item WPA2 is set in the Phone - Wi-Fi - Settings - Encryption menu, then
the password displayed when the Wi-Fi is switched on must be entered in the de-
vice to be connected. The password can be found in the Phone - Wi-Fi - Pass-
word - Show menu.
» page
109, Switching Wi-Fi network on/off.
Communication and multimedia
109