Skoda Yeti Owner's Manual page 118

AUX- and MDIinputs

First read and observe the introductory information given on page 113.
The AUX and MDI inputs are used to connect external audio sources (e.g. iPod or
mp3 player) and to play back music from these devices via the factory-fitted radio
or navigation system.
The AUX input for external audio sources is located below the armrest of the
front seats and is marked with the 
The MDI input is above the storage compartment in the front center console and
has the identifier   » page 72 characterized.
For a description of use, refer to the operating instructions for the relevant radio
or navigation system.
CD change
Fig. 101 The CD changer

First read and observe the introductory information given on page 113.
The CD changer for the radio and navigation system is located in the left side trim
panel of the boot.
1)
For vehicles with the navigation system Amundsen + the AUX input located on the front panel of the
navigation device » manual of the navigation system Amundsen +.
symbol.
1)
Inserting the CD
›
Touch the button » Fig. 101
C
. The CD is automatically loaded onto the lowest free position in the CD
B
changer. The indicator light in the corresponding button
Filling the CD changer with CDs
›
Press and hold the button
C
CDs one after the other (maximum 6 CDs) into the CD case
lights in the buttons stop flashing.
D
Inserting a CD at a specific position
›
Press the button C » Fig. 101. The indicator lights in the buttons
the memory spaces that are already assigned and flash in the case of free mem-
ory spaces.
›
Touch the desired button
D
 Ejecting a CD
›
Press button » Fig. 101. For assigned memory spaces, the indicator lights
A
now illuminate in the buttons
›
Press the corresponding button
Ejecting all CDs
›
Press and hold the button
A
CD-changer are ejected consecutively.
Note
Insert a CD, with the labelled side facing up, into the CD slot
■
is automatically drawn in. The play function will start automatically.
After loading a CD into the CD changer, wait until the indicator light of the cor-
■
responding button is illuminated. Then the CD case
D
CD.
If a position is selected, on which a CD is already located, this CD is ejected. Re-
■
move the ejected CD and load the desired CD.
and guide the CD (compact disc) into the CD-case
stops flashing.
D
» Fig. 101 for longer than 2 seconds and guide the
. The indicator
B
and guide the CD into the CD-case
.
D
. The CD is ejected.
D
» Fig. 101 for more than 2 seconds. All CDs in the
» Fig. 101
B
is free to load the next
B
Communication and multimedia
D illuminate
.
B
until it

115