Change halogen bulb
Fig. 196 Principle sketch: Change halogen bulb
First read and observe the introductory information and safety warn-
ings
on page 238.
›
Turn the respective protective cap
remove.
When removing the cap, make sure that this does not fall into the engine com-
partment.
›
Turn the connector with the bulb in downwards in the direction of the arrow
» Fig. 196
and remove it in the direction of the arrow
1
›
Remove the connector.
›
Insert the connector with the new bulb so that the fixing lug
justs the bulb into the recess on the reflector.
›
Insert the respective protective cap
wise until it stops.
Note
We recommend you have the bulb replacement performed by a specialist garage.
240
Do-it-yourself
» Fig. 195
on page 239 counter-clockwise and
.
2
» Fig. 196
A
» Fig. 195
on page 239 and rotate it clock-
Remove the protective grille for fog lights
Fig. 197 Guard: Version 1 / version 2
First read and observe the introductory information and safety warn-
ings
on page 238.
›
Undo the protective grille in the direction of the arrow
clamp for removing the wheel trims
›
Remove the protective grille.
ad-
» Fig. 197
using the
» page
220, Vehicle tool kit.