Skoda Yeti Owner's Manual page 63

Folding-in both of the exterior mirrors using the remote control key
The entire mirror can be folded by pressing the  symbol button on the remote
control key for 2 seconds. All windows must be closed.
The exterior mirror is folded back into the driving position when the ignition is
switched on.
Automatic dimming mirror
The exterior mirrors are dimmed together with the automatic dimming interior
mirror » page 59.
Fold in passenger's mirror
On vehicles fitted with the memory function for the driver's seat
mirror tilts down slightly when the reverse gear is engaged and the rotary knob is
in the position  or in position  on vehicles with right-hand drive
provides an aid in seeing the kerb of the pavement when parking the car.
The mirror returns into its initial position after the rotary knob is moved out of po-
sition  (or position  on vehicles with right-hand drive) and put into another posi-
tion or if the speed is more than 15 km/h.
This mode can be enabled or disabled via the Maxi DOT display in the Travel
mode» page 29 menu option.
Memory function for mirrors
On vehicles fitted with a memory function for the driver seat, the relevant setting
for the exterior mirrors can also be stored automatically when the seat position is
stored » page 63.
WARNING
Do not touch the exterior mirror surfaces, if the exterior mirror heating is
switched on - hazard of burning.
CAUTION
Never mechanically fold in or fold back the exterior mirrors with the fold-in func-
tion  by hand as this will damage the electric drive.
Note
The mirror heater only operates when the engine is running and up to an out-
■
side temperature of +35 ℃.
If the power setting function fails at any time, the exterior mirrors can be set by
■
hand by pressing on the edge of the mirror surface.
60
Using the system
» page 63, the
» Fig. 38 . This
