Preface; Remarks; Engine Serial Number; Safety - Rotax 914 F Installation Manual

3) Preface

Congratulation on your decision to use a ROTAX aircraft engine.
Before starting with the engine installation, read this Installation Manual carefully. The
Manual will provide you with basic information on correct engine installation, a requirement
for safe engine operation.
If any passages of the Manual are not completely understood or in case of questions, please,
contact an authorized Distribution- or Service Partner for ROTAX engines.
We wish you much pleasure and satisfaction flying your aircraft powered by this ROTAX
engine.
3.1)

Remarks

This Installation Manual is to acquaint the owner/user of this aircraft engine with basic
installation instructions and safety information.
For more detailed information on operation, maintenance, safety- or flight, consult the
documentation provided by the aircraft builder and dealer.
For further information on maintenance and spare part service contact the nearest
BOMBARDIER-ROTAX distributor (see chapter of Service Partners).
3.2)

Engine serial number

On all enquiries or spare parts orders, always indicate the engine serial number, as
the manufacturer makes modifications to the engine for further development.
The engine serial number is on the top of the crankcase, magneto side.

4) Safety

Although the mere reading of these instructions will not eliminate a hazard, the understanding
and application of the information herein will promote the proper installation and use of the
engine.
The information and components-/system descriptions contained in this Installation Manual
are correct at the time of publication. BOMBARDIER-ROTAX, however, maintains a policy
of continuous improvement of its products without imposing upon itself any obligation to install
them on its products previously manufactured.
BOMBARDIER-ROTAX reserves the right at any time to discontinue or change specifica-
tions, designs, features, models or equipment without incurring obligation.
The illustrations in this Installation Manual show the typical construction. They may not
represent in full detail or the exact shape of the parts which have the same or similar function.
Specifications are given in the SI metric system with the USA equivalent in parenthesis.
Where precise accuracy is not required, some conversions are rounded off for easier use.
Date
Page
1996 05 10
8
Install
914 F
Reference Modification-No.
- 0 -