Table of Contents
Advertisement
RS-1600-X24 User Guide
5.11 Saving and Restoring a Configuration
File
You can save all of your X24 Subsystem configuration settings to a file and restore that file.
5.11.1 Saving a Configuration File
You can save all of your X24 Subsystem configuration settings to a file. This lets you make a backup of
your settings. The configuration file contains all X24 Subsystem configuration information including the
following settings:
• FC host port
• FC device port
• Enclosure management
• Options
• Disk
• LAN
• Audio alarm
• Passwords/security
• Remote notification
Important
It does not include any array or partition information.
To save a configuration file:
1
From SAM, select Manage X24 Subsystem > Utilities > Configuration Utilities > Save Config File.
The Save Config File page displays.
2
Click Save Configuration File to save the current X24 Subsystem configuration to a file on the host
system or anywhere on your network.
The File Download window displays.
3
Select Save this file to disk and click OK.
The Save As window displays.
4
Navigate to where you want to save the file and enter the file name.
5
Click Save
5.11.2 Restoring a Configuration File
You can restore a saved X24 Subsystem configuration file. This lets you revert back to previous settings
or "clone" one X24 Subsystem's settings to another X24 Subsystem. You must use SAM to connect to
the X24 Subsystem where you want to restore the file.
To restore a configuration file:
1
From SAM, select Manage X24 Subsystem > Utilities > Configuration Utilities > Restore Config File.
The Restore Config File page displays.
48
.
Advertisement
Table of Contents
Troubleshooting
