Accessing The Disk Array Administrator Using The Rs-232 Serial Port - Impediment RS-1600-X24 User Manual

RS-1600-X24 User Guide
You can perform other configuration functions from either SM and have the same changes made
automatically on the other SM:
• Managing pool spares
• Configuring host channels
• Configuring disk channels
• Configuring the following X24 Subsystem settings:
• Configuring the following disk settings:
B.1 Accessing the Disk Array
Administrator Using the RS-232
Serial Port
You can access the Disk Array Administrator software using the RS-232 serial port. You must use a
straight-through serial cable. You cannot use a null modem cable.
Configure the RS-232 port in your terminal emulator software using the following settings:
Set the communications parameters for the terminal program as follows:
96
– Alarm mute
– Lock cache
– Write-back cache
– SMART
– Enclosure management processor (EMP)
Setting
Terminal Emulation
Font
Translations
Columns
Setting
Baud Rate
Data Bits
Stop Bits
Parity
Flow Control
Connector
Value
VT-100 or ANSI (for color support)
Terminal
None
80
Value
115,200
8
1
None
Software (XON/XOFF) or None
COM1 (typically)