Configuring The Security Options - Impediment RS-1600-X24 User Manual

RS-1600-X24 User Guide
To set SAM passwords:
1 From SAM, select Manage X24 Subsystem > General Config > Passwords/Security.
The Passwords/Security page displays.
2 In the Password Configuration panel, enter the passwords you want.
3 Click Change.

5.1.5 Configuring the Security Options

You can enable or disable the following LAN-related functions:
• FTP Capability: Controls access to the SMs using file transfer protocol (FTP), which permits you to
• Telnet Capability: Controls access to the SMs using Telnet, which permits you to manage the SMs
• HTTP: Controls access to the SMs using hypertext transfer protocol (HTTP), which permits you to
• SNMP Capability: Controls the availability of SNMP, which permits remote monitoring of the SM
• Internet Debug: Used for diagnosing problems during the technical support process. We
• In-Band Management: Controls whether you can use the X24 Configuration Application
To change any of the security options:
1 From SAM, select Manage X24 Subsystem > General Config > Passwords/Security.
The Passwords/Security page displays.
2 In the Security Configuration panel, select the options you want.
3 Click Change.
42
upgrade the SM's LAN Subsystem software. The default is enabled.
using your LAN. The default is enabled.
manage the SMs using SAM. The default is enabled.
using your LAN. The default is enabled.
recommend that this remain disabled unless support personnel tell you to enable it. The default is
disabled. You must restart both SMs for the change to take effect. Select Shutdown/Restart from
the SAM menu.
Programming Interface (CAPI) to access the SM. Disabled means the SM does not have a
management LUN assigned. Click the blue text to access the page where you can assign the
management LUN.