Changing A Partition Lun - Impediment RS-1600-X24 User Manual

RS-1600-X24 User Guide
4 In the Change Name panel, enter the new name.
You can use up to 20 characters. You can use any character on your keyboard (any printable ASCII
character), except double quotes (").
5 Click Change Partition Name.

3.4.3 Changing a Partition LUN

You can change the LUN assigned to a partition, as it appears under the X24 Subsystem's target ID from
the host system's point of view. The change takes place immediately, however, you may need to restart
the host system to see the partition at the new LUN.
Note You cannot change the partition's LUN to one that is already in use. If you want to use a LUN that is
already in use, you must first reassign the LUN in use.
For more information about LUNs and your X24 Subsystem, see section
Viewing LUN Information", on page
To change a partition LUN:
1 From SAM, select Manage X24 Subsystem > LUN Management > Change Partition LUN.
The Change Partition LUN page displays with a list of all existing arrays.
2 In the Select an Array to View LUN Information panel, select the array whose partition you want to assign
a new LUN.
3 In the Partition Menu panel, select the partition name.
4 In the Change LUN panel, select a new LUN.
5 Click Change Partition LUN.
26
196.
G.4, "Understanding LUNs and