Configuring The Snmp Settings - Impediment RS-1600-X24 User Manual

RS-1600-X24 User Guide
Changes to either of these settings on either SM module are automatically updated on the other SM
module.
To set the Telnet settings:
1 From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu displays.
2 Select LAN Configuration and press Enter.
The LAN Configuration screen displays.
3 Select Telnet Settings and press Enter.
The Telnet Settings screen displays.
4 Select the option you want and press Enter.
The screen displays related to the option you selected.
5 Enter or select the option you want and press Enter.
The system confirms that you want to make the change.
6 Select Yes and press Enter.
The system makes the change.
H.2.4 Configuring the SNMP Settings
You can set six Simple Network Management Protocol (SNMP)-related settings:
• Trap Host: Host computer's IP address that is set up to receive SNMP traps. The default is 0.0.0.0.
• Traps Enable: On or off toggle to enable SNMP traps. The default is No (disabled).
• Read Community: SNMP read password. The default is Public.
• Write Community: SNMP write password. The default is Private.
• Event Filter: Informational, Warning, or Error. The default is Warning.
• Trap Filter: Informational, Warning, or Error. The default is Warning.
Changes to any of these settings on either SM module are automatically updated on the other SM
module.
To set the SNMP settings:
1 From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu displays.
2 Select LAN Configuration and press Enter.
The LAN Configuration screen displays.
216