Starting And Stopping Remote Notification; Setting Up The Events To Be Monitored; Setting Up The E-Mail Addresses - Impediment RS-1600-X24 User Manual

RS-1600-X24 User Guide

4.2.1 Starting and Stopping Remote Notification

You can start or stop remote notification at any time. If you start remote notification, be sure to select
event categories or specific events to monitor.
To start or stop remote notification:
1 From SAM, select Manage X24 Subsystem > Remote Configuration > Events to be Monitored.
The Current Settings page displays
2 Select whether you want to start or stop remote notification.
3 Click Change Notification.

4.2.2 Setting Up the Events to be Monitored

You can select the events you want to monitor using remote notification in two ways:
• By category
• By specific event
You can combine the event selections in any way that meets your needs. When one of these events
occurs on the X24 Subsystem, SAM sends a message to the e-mail addresses that you have set up.
To set up
1 From SAM, select Manage X24 Subsystem > Remote Configuration > Select Event Categories.
The Select Event Categories page displays.
2 Select which event categories, if any, you want to trigger an e-mail message.
3 Click Change Monitored Event Categories.
4 Select Manage X24 Subsystem > Remote Configuration > Select Specific Categories.
The Select Specific Events page displays.
5 Select the specific events, if any, you want to trigger an e-mail message.
Use the buttons at the bottom of the page to select or clear all events.
6 Click Change Individual Monitored Events.

4.2.3 Setting Up the E-mail Addresses

You can send events to up to four e-mail addresses for remote notification. You can also test the e-mail
setup by clicking Send Test E-mail.
To set up e-mail addresses:
1 From SAM, select Manage X24 Subsystem > Remote Configuration > E-mail Configuration.
The E-mail Configuration page displays.
34
events:.