Impediment RS-1600-X24 User Manual page 67

2 Select the option you want:
• Use Current IP Addresses: Restores the configuration file to the X24 Subsystem that SAM is
currently connected to and retains the currently assigned IP addresses. Use this to restore a backup
configuration file to the current X24 Subsystem without changing the IP addresses of the X24
Subsystem. This option ignores the IP addresses contained in the configuration file.
• Use New IP Addresses: Restores the configuration file to the X24 Subsystem SAM is currently
connected to and changes the X24 Subsystem's IP addresses to what you enter here. Use this
option to clone the X24 Subsystem and change the IP addresses to what you enter. This option
ignores the IP addresses contained in the configuration file. Enter the IP Address, Subnet Mask, and
IP Gateway for both SMs on the same X24 Subsystem. After the file is restored, you must reconnect
to the X24 Subsystem using one of the new IP addresses.
• Use Restore File IP Addresses: Restores the configuration file to the X24 Subsystem that SAM is
currently connected to and changes the IP addresses to those contained in the configuration file.
Use this to restore a configuration file to the current X24 Subsystem whenever the IP addresses in
the configuration file are the IP addresses you want assigned to the X24 Subsystem. After the file is
restored, you may need to reconnect to the X24 Subsystem using one of the IP addresses from the
file.
3 Click Continue.
A new page displays. The information on the new page depends on your selection in the previous page.
4 If you chose the Use New IP Addresses option, enter the new IP addresses here and click Continue
Restore Process.
5 Click Browse to navigate to the X24 Subsystem configuration file on the host system or anywhere on
your network.
The Choose File window displays.
6 Navigate to the file and select it.
7 Click Open.
8 Click Restore Configuration File.
System Configuration
49