Spare Parts And Ancillary Items; Upgrading Your Lrc I/O Modules - Impediment RS-1600-X24 User Manual

7.21 Spare Parts and Ancillary Items

The following replaceable parts are available for the RS-1600-X24 Subsystem:
• Chassis (including Backplane)
• AC Power Supply/Cooling Module
• Drive Carrier Module
• Storage Manager Module
• External FC-AL Signal Cables
• Cables
– LC - LC optical cable
– LC - SC optical cable
– SFP - SFP copper patch cable (1 M length)
– HSSDC2 - HSSDC1
– HSSDC2 - DB9
– HSSDC2 - HSSDC2

7.22 Upgrading Your LRC I/O Modules

You can upgrade your existing JBOD or RAID LRC module to a Xyratex X24 RAID LRC module in
accordance with the following procedure:
Caution Ensure that your Power Supply/Cooling modules are marked with P/N 44191-XX. If they are not you will
need to upgrade your PSUs. Please contact your supplier and request the upgrade modules.
1 Change the Ops Panel switch settings to those shown in
Important Switch settings are only read at Power On.
The X24 enclosure ID must always be set to select ID1.
2 Remove the existing LRC modules in accordance with the procedure in
on page 72.
3 Install the Storage Manager modules in accordance with the procedure in
Module", on page 73.
– RS232 cable
– LAN cable
• 19 inch rack mounting rail kit
• Dummy Carrier Module
• Blank SM Module
• SFP module, optical
• SFP module, copper
• Battery, Li-ion
• (Country specific) power cords
• Bifurcated power cords
• Keys for Drive Carrier modules.
• All documentation
Table 7–9.
7.12.3.1, "Removing the Module",
7.12.3.2, "Inserting the
X24 Troubleshooting
87