RS-1600-X24 User Guide
• Provide a suitable power source with electrical overload protection to meet the requirements laid
• A faulty power supply/cooling module must be replaced with a fully operational module within 24
Warning
Do not remove covers from the power supply unit. Danger of electric shock inside. Return the PSU
to your supplier for repair.
Caution
Caution: If this equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
Battery Safety
The battery is user replaceable, please refer to the Battery Replacement Procedure.
Warning
There is a danger of explosion if the battery is incorrectly replaced.
• Dispose of used batteries in accordance with the manufacturer's instructions and National
Laser Safety
Class 1 Laser Product
When the X24 Subsystem is supplied with optical modules they contain a laser that complies with Laser
Class 1, US 21 CFR (J) and EN 60825-1.
If optical modules are to be provided and fitted by the end user, lasers must comply with the standards
listed above.
xii
down in the technical specification.
hours.
PSU Safety Label:
Electric Shock Hazard Inside
regulations.