X24 Fc-Al Lrc I/O Module Specification; Raid Card; Software Enclosure Services (Ses) Support - Impediment RS-1600-X24 User Manual

RS-1600-X24 User Guide

1.6.9 X24 FC-AL LRC I/O Module Specification

LRC-X24
Mounting
Connectors
Battery Backup
LED Functions
• Host Port 0 Signal Good
• Host Port 1 Signal Good
• Expansion Port 0 Rx Good
• Expansion Port 1 Rx Good
• ESI/LRC module fault LED
• Cache Active
• RAID Controller Ready
• Battery Fault
Power Dissipation

1.6.10 RAID Card

RAID
LRC & ESI Function
Memory

1.6.11 Software Enclosure Services (SES) Support

The enclosure has a sophisticated self-monitoring and reporting function which conforms to ANSI SES
specifications.This reports on such topics as:
For more information on the implementation of this function please request a copy of the SES
specification from your supplier.
14
Speed 2Gb
• Creates connections to 2 x 8 drive mode dual loop structures
• 2 external Expansion ports, SFP connectors
• 2 Host SFP ports
• 1 Ethernet port
Rear, single bays 3 and/or 4 (see
• 2 x SFP module LC optical, max. cable length 500m, or,
• 2 x Copper HSSDC-2 connector, max. cable length 6m.
• 1 x RJ42 Ethernet connector
• 1 x RS232, 6 pin Mini-DIN (factory use only)
Li-ion Battery, Hold up time for RAID cache:
5A @ 3.3V
7.4A @ 5V
Integrated Fibre - Fibre controller
600k Hrs MTBF
1.2 MHz
512Mb - 1Gb (planned)
– Enclosure temperature
– Fan speed
– Drive condition
– Operator panel status
– RAID controller status: Not Ready, Partner Fail and Partner Present outputs
– 512Mb: 72 hours (worse case)
Green
Green
Green
Green
Amber
Green
Green
Amber
Figure 1–3)