Displaying Hardware And Configuration Information - Impediment RS-1600-X24 User Manual

D.4 Displaying Hardware and
Configuration Information
You can display the X24 Subsystem's hardware and configuration information. This is where you can see
what version of the firmware you have. Technical support personnel may request this information.
You can display the hardware and configuration information two ways:
• Hardware information only
• Hardware and configuration information
Table 4–1 lists the configuration information that is available.
Table 4–1
Group
HOST 0
HOST 1
Configuration information (per SM)
Field What displays
Active Speed—1 Gb/s or 2 Gb/s
Channel as set in the Disk Array
Administrator software.
Topology Loop or Point-to-Point as
set in the Disk Array
Administrator software.
Node WWN FC World Wide Name for
node.
Port WWN FC World Wide Name for
port.
Loop ID SOFT or a specific
number as set in the Disk
Array Administrator
software.
FC Addr 24-bit FC address or None
if the FC link is not active.
CAPI LUN NONE or specific number
as set in the Disk Array
Administrator software.
Monitoring System Status
Field What displays
Current Loop Currently assigned
ID value or Inactive if the
FC link is not active.
AL_PA Currently assigned
value or None if the FC
link is not active.
159