Configuring The Contact Settings - Impediment RS-1600-X24 User Manual

3 Select SNMP Settings and press Enter.
The SNMP Settings screen displays.
4 Select the option you want and press Enter.
The screen displays related to the option you selected.
5 Enter or select the option you want and press Enter.
The system confirms that you want to make the change.
6 Select Yes and press Enter.
The system makes the change.
H.2.5 Configuring the Contact Settings
You can set four contact settings:
• System Name: Name of the X24 Subsystem as seen by other systems on the LAN. You can enter
up to 80 characters. The default is Uninitialized Name.
• System Contact: Name of a contact person responsible for the X24 Subsystem. You can enter up
to 80 characters.
• System Location: Location of the X24 Subsystem. You can enter up to 32 characters.
• System Information: Read-only screen with information about the system.
Changes to any of these settings on either SM module are automatically updated on the other SM
module.
To set the contact settings:
1 From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu displays.
2 Select LAN Configuration and press Enter.
The LAN Configuration screen displays.
3 Select Contact Settings and press Enter.
The Contact Settings screen displays.
4 Select the option you want and press Enter.
The screen displays related to the option you selected.
5 Enter or select the option you want and press Enter.
The system confirms that you want to make the change.
6 Select Yes and press Enter.
The system makes the change.
LAN Configuration
217