G.12Restoring Default Settings - Impediment RS-1600-X24 User Manual

RS-1600-X24 User Guide
3 When you have replaced the drive, resume back end activity by pressing Esc.
Caution Do not stay in the Hot Swap Pause mode for too long; otherwise, an operating system time-out may occur
(the time varies according to the operating system). For example, in Windows NT, the default limitation
during I/O activity is 10 seconds.
G.12 Restoring Default Settings
You can restore all of the X24 Subsystem default settings. You may want to do this if the X24 is not
working properly and you cannot determine why. This lets you then change the settings that are critical
to your configuration.
To restore the default settings:
1 From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu displays.
2 Select Restore Defaults and press Enter.
The Restore Defaults screen displays.
The system confirms that you want to make the change.
3 Select Yes and press Enter to make the change.
The system confirms that the change is made.
4 Press Enter to return to the Configuration Menu.
208