Viewing And Restoring Default Settings; Viewing Default Settings; Restoring Default Settings - Impediment RS-1600-X24 User Manual

RS-1600-X24 User Guide
5.12 Viewing and Restoring Default
Settings
You can view and restore all of the X24 Subsystem's default settings.

5.12.1 Viewing Default Settings

You can view the X24 Subsystem's default settings as well as the current settings.
To view the default settings:
• From SAM, select Manage X24 Subsystem > Utilities > Configuration Utilities.

5.12.2 Restoring Default Settings

You may want to do this if the X24 Subsystem is not working properly and you cannot determine why.
This lets you then change the settings that are critical to your configuration.
You can also view all of your current settings and a compare them to the default settings.
Restore Defaults does not affect any settings related to arrays or partitions. This restores all configuration
settings except:
• Management (CAPI) LUN
• IP settings (addresses, subnet mask, and gateway)
• Device port link speeds
To see a list of the current settings and the default settings, click the blue See Restore Default Changes
text.
To restore the default settings:
1 From SAM, select Manage X24 Subsystem > General Config > Restore Defaults.
The Restore Defaults page displays.
2 Click Restore Defaults.
You must restart the X24 Subsystem for the change to take effect.
3 Select Shutdown/Restart from the SAM menu.
50
The Show Changed Settings page displays.