Feature Codes - Avaya 140 User Manual

1.7 Feature Codes

The following feature codes can be dialed from most phones after pressing Feature. Most of these features can also be
assigned to programmable buttons.
Feature Code Description
Do Not Disturb 01
40
" Cancel 01
40
Recall 03
Save Number 04
Redial
Last Number 05
Redial
20
Conference Drop 06
29
Privacy 07
31
Call Forward 11
35
Call Forward 11
Cancel
35
Account Code 12
Entry
39
Voice Mailbox 14
Transfer
28
VMS Cover 15
48
Caller ID Name 16
Display
Caller ID 17
Inspect
Call Coverage 20
36
Station Lock 21
38
Station Unlock 22
38
Caller ID Log 23
Hot Dial 26
Message Alert 27
Notification
Absent Message 28
34
Contact Closure 41
1
Contact Closure 42
2
System Release 590
Quick Version 1400/9400/9500 Phone User Guide
IP Office Essential Edition
This function allows you to switch do not disturb on or off.
This function allows you to send a recall or hook flash signal.
This function allows you to save the number dialed during a call and to redial that number
when idle. This can be used when the number dialed does not answer.
This function allows you to redial the last external number dialed.
This function allows you to select and drop a call from a conference.
This function allows you to turn privacy on or off. When on, other extensions are not able to
bridge into your calls.
This function allows you to redirect all your calls to another number. If the system
administrator has configured your for Remote Call Forwarding, you can forward calls externally
by specifying a personal speed dial as the destination.
This function allows you to enter an account code prior to making a call or during a call.
This function allows you to transfer your current call to another extension's mailbox. Your
current call is put on hold and you enter the target extension number to indicate the mailbox
required.
This function allows the you to switch use of voicemail coverage for your extension on or off.
This function allows you to swap the display of caller ID name and number information on the
phone.
This function allows you to see the caller ID of a call on another line without interrupting the
current call to which you are connected.
This function allows you to switch call coverage on or off. When on, any calls to you that ring
unanswered also start ringing at your call coverage extension.
This function allows you to lock and unlock your extension from being used to make calls.
When selected, you are prompted to enter a four digit code after which the extension is locked.
If the extension is already locked, use of this function prompts for reentry of the four digit
code to unlock the extension.
This function can only be used by the first two extensions in the system. It allows the user to
unlock any extension without needing to know the code that was used to lock that extension.
This function allows you to view the phone system's call log of all caller IDs of calls received by
the system. To use this you must be one of the three extensions configured for call ID logging
by your system administrator.
This function allows you to dial a stored number without first going off hook or pressing the
SPEAKER button.
This function allows you to see the current state of other user's message waiting lamps. It is
used in conjunction with other users for which you have Auto Dial - Intercom buttons.
This function allows you to set or clear an absent message for display on you phone. When set,
the absent message is also displayed on other extensions when they call the user.
This function you to operate the system's contact closure 1 or 2 connection. To use this you
must be a member of the system's contact closure group.
Displays the core software level that the system is running.
Page 14
- Issue 3b (23 February 2011)