Panasonic KX-TVS125 Installation Manual page 395

6.
The VPS plays the current operator's extension setting. Press [1] to change or assign the
operator's extension. Press [2] to accept the current setting, or Press [3] to delete the
current setting—Go to Step 9.
Note
Operator 1's extension number cannot be deleted.
7.
Type the extension number.
8.
The VPS plays the current extension setting. Press [2] to accept it.
9.
Repeat Steps 6-8 to assign or to delete the extension number for the Day, Night, Lunch
and Break Modes for each operator.
10.
The VPS plays the current Telephone number 1 setting. Press [1] to change the
telephone number. If a telephone number has not yet been assigned, go to Step 11.
Press [2] to accept the current setting—Go to Step 13.
11.
Type the telephone number using "0-9" and " ".
Notes
• Please make sure you begin the telephone number with a Line Access Code (to seize
a CO line).
• When connected to the KX-TD500, the maximum number of characters allowed to
be entered is 24; when connected to other KX-T series PBX, 16.
12.
The VPS plays the current Telephone number 1 setting. Press [2] to accept it.
13.
The VPS plays the current Telephone number 2 setting. Press [1] to change the
telephone number. If a telephone number has not yet been assigned, go to Step 14.
Press [2] to accept the current setting.
14.
Type the telephone number using "0-9" and " ".
15.
The VPS plays the current Telephone number 2 setting. Press [2] to accept it.
D4 CUSTOMIZING THE MESSAGE MANAGER'S MAILBOX
Installation Manual 395