Panasonic KX-TVS125 Installation Manual page 179

Table 5-6
Description
Operator's
Extension
Operator's
Mailbox No.
Operator No
Answer
Time
Busy
Coverage
Mode
Value Range
(Default)
1-5 Digits
(0)
2-5 Digits
(KX-TVS125/KX-
TVS225: 998;
KX-TVS325: 9998)
10-60 s
(30)
1. Hold
2. No Answer Coverage
3. Call Waiting
4. Disconnect Message
(Hold)
5.4 AUTOMATED ATTENDANT PARAMETERS
Description/Function
Specifies the extension number for Operator 1.
Notes
• The default setting (0) cannot be used
with the Message Waiting Notification—
Lamp feature and the Remote Call
Forwarding Set feature. When using
these features, you must assign the
extension number that is included in the
Extension Numbering Plan.
• The extension number must not be
assigned anywhere else (in particular, the
extension must not have a mailbox).
Otherwise, you will get an error message.
Callers to Operator 1 are prompted to leave a
message in this mailbox depending upon how the
Busy Coverage or No Answer Coverage modes
are set.
When a call to Operator 1, 2, or 3 is not answered
within the time set, the VPS will offer other options
as defined by the "No Answer Coverage Mode".
Notes
• This timer applies to Operator 1, 2, and 3.
• If more than 1 operator is assigned, we
recommend to reduce the time on the
"Operator No Answer Time" to 15 s.
Specifies how to handle calls when the Operator 1
extension is busy.
1. Hold—Automatically places the caller on hold
and the Operator 1 extension is called again.
2. No Answer Coverage—Offers the option
specified by the No Answer Coverage Mode to
the caller.
3. Call Waiting—Signals the Operator 1 when
another call is waiting using the Call Waiting
feature of the PBX.
4. Disconnect Message—Disconnects the caller
after playing "Thank you for calling."
Installation Manual 179