Table of Contents
Advertisement
D3 SETTING UP MESSAGE WAITING NOTIFICATION
Note
If a telephone number has not been assigned to the selected device number, you cannot
set the device status. See "Assigning Notification Numbers" to assign a telephone
number.
5.
Press [1], [2], or [3] to select the device status.
•
•
•
Assigning Notification Numbers
Up to 3 telephone or beeper numbers can be set for message notification. Use the number
keys 0 to 9, the tone/pulse switch, and the Beeper Callback Number Display Entry Code [X]
to make these assignments.
When the Beeper Callback No. Entry Code is added at the end of a beeper number, the VPS
will ask the caller to enter the callback number that will display on the beeper. System
Programming determines if the Callback Number Entry is to be entered before, after, or
without the message.
It is also possible to have the caller select whether or not to enter a callback number. The
System Manager must authorize the use of the Beeper Callback No. Entry Code.
1.
Log in the Main Menu.
2.
Press [2] to set Message Waiting Notification
3.
Press [3] to assign Telephone Number.
4.
Press [1] to change the first telephone number, [2] to change the second telephone
number, or [3] to change the third telephone number.
5.
Press [1] to set the telephone number.
6.
Type the telephone number.
7.
Press [2] to accept the entry.
•
•
•
•
•
•
•
392
Installation Manual
[1] Schedule (enabled on the schedule)
[2] Continuously (enabled whole day)
[3] Not Use (disabled whole day)
[1] Change the telephone number
[2] Accept
[3] Review
[4] Add more digits
[5] Insert a pause
[6] Set dial mode
[7] Insert a wait for dial tone
Advertisement
Table of Contents
Troubleshooting
