Panasonic KX-TVS125 Installation Manual page 280

B2 SYSTEM ADMINISTRATION—MAILBOXES
Table B-4
Parameter
All Calls
Transfer to
Mailbox
Caller ID
Number 1 for
Toll Saver
Caller ID
Number 2 for
Toll Saver
DID Number
for Toll Saver
280 Installation Manual
Value Range
(Default)
1. Yes If this parameter is set to "Yes", all calls routed to the
2. No extension are automatically forwarded to the extension's
(No) mailbox without ringing the telephone. Forwarding is
accomplished through the Automated Attendant service.
Callers are permitted to leave a message.
Note
When this feature has been set to "Yes", the mailbox
owner's extension does not necessarily need to exist
as a phone extension of the PBX.
Up to 20 digits Specifies up to two Caller ID numbers or a DID number for
consisting of Toll Saver. The subscriber can check whether there are
new messages in his mailbox with these phone numbers
1-9, 0,
without incurring telephone charges. Note that when these
(None)
phone numbers are specified by the subscriber, the phone
numbers are unavailable to other subscribers in the
system. (The phone numbers must be unique.)
Notes
•
•
Description/Function
If Toll Saver is set to "Caller ID" in your Class of
Service, a DID number for Toll Saver cannot be
assigned. If Toll Saver is set to "DID number" in
your Class of Service, Caller ID Number 1/2 for
Toll Saver cannot be assigned. If Toll Saver is set
to "No" in your Class of Service, neither Caller ID
Numbers nor a DID number can be assigned.
DID number setting for this feature is only
available when the VPS is connected to the
following PBXs with DPT Integration.
• KX-TD816 (P311Q or higher)
• KX-TD1232 (P211Q or higher)
• KX-TD500 (V4M or higher)