System Components - Panasonic KX-TVS125 Installation Manual

Inside View of the Main Cabinet—KX-TVS325
Internal Modem
Card
Grounding Strap
DIP Switch
Power Indicator
Note
Ports 1-24 are at TNV.

System Components

Power Indicator
Indicates the system status: when flashing, the system is off-line (not ready to receive calls).
RS-232C Connector
Connects an ASCII or VT terminal to the VPS that is necessary to program the system.
Ground Terminal
Must be connected to a ground source with less than 1
Fuse
Protects the system from power line surges and should only be replaced with the same type.
Please see the fuse socket on the cabinet for the value of the fuse.
AC Inlet
Connects the power cable to an AC outlet dedicated to the VPS.
Power Switch
Starts the system and begins the self-test.
SAFETY PRECAUTION: When making any connections or removing the cover, be sure
the power switch is switched off.
Internal Modem Card—KX-TVS325
Modem card for remote administration.
MODEM SLOT 6 SLOT 5 SLOT 4 SLOT 3 SLOT 2 SLOT 1
1.3 SYSTEM BASICS
Slots For
Optional Port
Cards
Factory-installed
KX-TVS204 card
3.5" Hard Disk
Drive
Ferrite Cores
Cable Clip
resistance.
Installation Manual 23