Screen output:
5.
To set the trunk (CO line) features, follow the instructions in "Settings for the trunk (CO
line) features" (3.3.3 KX-TD500 Programming for Inband Integration in 3.3
CONNECTING THE VPS WITH PANASONIC KX-T SERIES PBXs).
6.
Set the PBX to send DID numbers to the VPS.
a)
Go to the "2-7 System Option 6" screen.
b)
Enable "67.Sending DID Number to VPS".
Note
This setting enables the PBX to send DID numbers to the VPS. If you want to use the
features which utilize DID numbers (e.g., Toll Saver, DID Call Routing), you must
enable this setting.
4.2 KX-TD500 PROGRAMMING FOR DIGITAL INTEGRATION
Installation Manual
109