Table of Contents
Advertisement
B6 SYSTEM ADMINISTRATION—SYSTEM PARAMETER SETTINGS
Table B-28
Parameter
System
Prompt
Selection
Number
User 1
Prompt
Selection
Number
User 2
Prompt
Selection
Number
Position of
"AM/PM" in
Time Stamp
for User 1
Prompt
Position of
"AM/PM" in
Time Stamp
for User 2
Prompt
330
Installation Manual
Value Range
(Default)
1-9
Assigns a selection number (1-9) to each prompt. Callers
(None)
use the numbers to select the desired language for their
message prompts. This setting is required when either
one or both of the following parameters are set to
"Selective".
Port Assignment—Incoming Call Service Prompt
Authorization of External Message Delivery—Prompt
Mode
Example:
For service in English, press (7).
For service in French, press (8).
For service in Chinese, press (9).
The Message Manager is responsible for recording this
Multilingual Selection Menu.
Note
The Prompt Selection Number should not match the
first digit of any mailbox number, because mailbox/
extension access is possible during and after the
Multilingual Selection Menu.
1. Before
This parameter setting is functional only when User 1 or
2. After
User 2 Prompts are in use. This parameter specifies the
3. 24-h
following:
(After)
1. Before
1. Before—the VPS announces "AM/PM" before the time
2. After
(e.g., P.M. 3:42).
3. 24-h
2. After—The VPS announces "AM/PM" after the time
(24-h)
(e.g., 3:42 P.M.).
3. 24-h—the VPS announces the time in 24-h format
(e.g., 15:42).
Note
When System Prompts are in use, the parameter is
set to "After".
Description/Function
Advertisement
Table of Contents
Troubleshooting
