Panasonic KX-TVS125 Installation Manual page 291

B3 SYSTEM ADMINISTRATION—SETTING COS (CLASS OF SERVICE) PARAMETERS
Table B-7
Parameter
Authorization for 1. Yes
2. No
Message
Notification
1. Caller Select
Beeper
2. Without
Callback No.
3. Before
Entry Mode
4. After
5. Disable
Value Range
(Default)
If set to "Yes", subscribers are able to utilize the Message
Waiting Notification feature. The sub-parameters to be
(Yes) set include Beeper Callback No. Entry Mode, MWL
Notification for Unreceived Message, and Device
Notification for Unreceived Message. If set to "No", sub-
parameters cannot be assigned.
Note
This parameter in COS No.1 is set to "Yes" when the
Quick Setup procedure is used to create Subscriber
Mailboxes.
Permits subscribers to use the Callback Number Entry
feature.
Caller
Select:
(Disable)
Without:
Before:
After:
Disable:
Note
To utilize this feature, the callback number entry
code must be included in the subscriber's beeper
number. When "Disable" is selected or if the caller
does not enter a callback number, "System Callback
No." (see Table B-28) will be displayed on the
beeper's display. If a caller's number is received
through a telephone company's Caller ID service,
the caller's number will be displayed instead of
"System Callback No.".
Description/Function
After recording a message, the caller is
asked if the message is urgent. If urgent,
the caller is asked to enter the callback
number.
Without recording a message, the caller is
asked to enter the callback number.
Before recording a message, the VPS asks
the caller to enter the callback number.
After recording a message, the VPS asks
the caller to enter the callback number.
Disables the Callback Number Entry
feature.
Installation Manual 291