Panasonic KX-TVS125 Installation Manual page 305

Operator's Parameters-Day Mode-Operator 1
Use this parameter to enable or disable the Operator Service. It specifies Operator 1's
extension and the treatment of the calls transferred to that extension. The extension number
assigned for Operator 1 in the Day Mode will be for the Message Manager. When Operator
service is enabled, operator-seeking calls first reach Operator 1's extension.
Notes
• Because the extension number assigned for Operator 1 in the Day Mode is for the
Message Manager, you cannot assign this extension to any other mailbox.
• By default, the extension number for the Message Manager's extension (assigned for
Operator 1 in the Day Mode) is "0". However, the default setting cannot be used with
the Message Waiting Notification—Lamp feature and the Remote Call Forwarding
Set feature. When using these features, You must assign the extension number that
is included in the Extension Numbering Plan.
To access the menu for Operator Parameters-Day Mode-Operator 1, follow the
menu path as shown:
System Administration Top Menu-1-4-1-2-1-1
Table B-12
Parameter
Operator
Service
Operator's
Extension
Operator's
Mailbox No.
B5 SYSTEM ADMINISTRATION—SERVICE SETTINGS
Value Range
(Default)
1. Disable Enables or disables the Operator Service feature.
2. Enable
Note
(Enable)
1-5 digits Specifies the extension number for Operator 1.
(0)
Notes
2-5 digits Callers to Operator 1 are prompted to leave a message
(KX-TVS125/KX- in this mailbox depending upon how the Busy Coverage
TVS225: 998; KX- or No Answer Coverage modes are set.
TVS325: 9998)
Description/Function
All non-touchtone input calls in Automated
Attendant Service will be transferred to the General
Delivery Mailbox when the Operator Service is
disabled.
• The default setting (0) cannot be used with the
Message Waiting Notification—Lamp feature.
An extension number must be assigned that is
included in the Extension Numbering Plan.
• The extension number must not be assigned
anywhere else (in particular, the extension must
not have a mailbox). Otherwise, you will get an
error message.
Installation Manual 305