To Place The Document On The Original Glass - Konica Minolta bizhub 362 User Manual

Basic copy operation

To place the document on the original glass

0 For details on the types of documents that can be placed on the original
glass, refer to "Original documents" on page 8-17.
0 When placing the document on the original glass, be sure to lift open the
original cover or ADF at least 15°.
If the document is placed on the original glass without the original cover
or ADF being lifted at least 15°, the correct document size will not be
detected.
0 Do not place objects weighing more than 2 kg on the original glass. In
addition, do not press down extremely hard on a book spread placed on
the original glass, otherwise the original glass may be damaged.
0 For thick books or large objects, make the copy without closing the
original cover or ADF. When a document is being scanned with the
original cover or ADF open, do not look directly at the light that may shine
through the original glass. Although the light that shines through the
original glass is bright, it is not a laser beam and, therefore, is not as
dangerous.
1
Lift open the original cover or ADF.
2
Position the document face down onto the original glass.
– Load the document pages so that the top of the document is
toward the back or the left side of the machine.
bizhub 362/282/222
When loaded in the
v orientation:
When loaded in the
w orientation:
4
4-11