12
Default Finishing Mode
Tab
4/6
Note
[Corner Staple] and [2 Staples] appear only if optional finisher is installed.
[Hole-Punch] appears only if optional punch unit is installed.
Sort/Non-Sort Auto Change
Tab
5/6
!
Detail
If the "Sort/Non-Sort Auto Change" parameter is set to "ON", the
"Uncollated" setting is selected when only one page was copied, and the
"Sort" setting is selected when two or more pages are copied.
12-18
Parameter
Description
Default Finishing
Select one of the following as the default
Mode
sorting setting.
Non-Sort, Sort, Group
Select one of the following as the default
Finishing setting.
Corner Staple,
2 Staples, Hole-Punch
Parameter
Description
Sort/Non-Sort Auto
Select whether the "Sort" or "Uncollat-
Change
ed" setting is automatically selected ac-
cording to the number of copy pages.
Utility mode
Default setting
Non-Sort
Not specified
Default setting
ON
bizhub 362/282/222