Specifying Whether To Enable Access Locks And Password Rules, And Specifying The Method For Deleting Image Data (Mode 469) - Konica Minolta bizhub 362 User Manual

Utility mode
Specifying whether to enable access locks and password rules, and
specifying the method for deleting image data (mode 469)
Specify whether to lock access if the password is entered incorrectly, specify
whether to apply the password rules, and specify the method for deleting
image data.
Settings at the time of purchase
Bit
Setting
Specifying the settings
The grayed out cells are the settings at the time of purchase.
Bit
7
6
5
4
3, 2, 1, 0
*1
This setting is applied after the machine is turned off, then on again.
bizhub 362/282/222
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
Specify whether to 0
lock access when a
1
password (account
track and administra-
tor passwords) is en-
tered incorrectly three
times.
Specify whether or 0
not image data on the
hard disk is overwrit-
ten to delete it.*1
1
--------------------- 0
For security, specify 0
whether to apply a
password rule.
1
--------------------- 0000
12
Description
Does not lock access
Locks access
Image data on the
hard disk is not over-
written when it is de-
leted.
Image data on the
hard disk is overwrit-
ten when it is deleted.
*Do not change this
bit when specifying
settings for this func-
tion.
Do not apply a pass-
word rule
Apply a password rule
*Do not change these
bits when specifying
settings for this func-
tion.
12-63