To Place The Document On The Original Glass - Konica Minolta bizhub C250 User Manual

Basic copy operations

To place the document on the original glass

0 For details on the types of documents that can be placed on the original
glass, refer to "Original documents" on page 7-25.
0 When placing the document on the original glass, be sure to lift open the
ADF at least 20°.
If the document is placed on the original glass without the ADF being lift-
ed at least 20°, the correct document size will not be detected.
0 Do not place objects weighing more than 4-1/2 lb on the original glass. In
addition, do not press down extremely hard on a book spread placed on
the original glass, otherwise the original glass may be damaged.
0 For thick books or large objects, make the copy without closing the orig-
inal cover, or ADF if it is installed. When a document is being scanned
with the original cover or ADF open, do not look directly at the light that
may shine through the original glass. Although the light that shines
through the original glass is bright, it is not a laser beam and, therefore,
is not as dangerous.
1
Lift open the original cover, or the ADF if it is installed.
2
Position the document face down onto the original glass.
– Load the document pages so that the top of the document is to-
ward the back or the left side of the machine.
When loaded in the
v orientation:
C250
When loaded in the
w orientation:
20°
3
20°
3-9