Stopping/Deleting A Job; To Stop/Delete A Copy Job - Konica Minolta bizhub 362 User Manual

Basic copy operation
4.12

Stopping/deleting a job

The following procedure describes how to stop scanning the document, stop
the printing operation and delete the copy job.

To stop/delete a copy job

0 If a document is being scanned for a job, pressing the [Stop] key stops
scanning and printing.
1
Press the [Stop] key while a
document is being scanned or a job
is being printed.
After the message "Copy cycle
temporarily suspended." appears,
scanning and printing stops.
The Stop screen appears.
2
Perform the desired operation.
– To delete a stopped or queued job, touch the button for the job to
be deleted. The job is deleted.
– To continue the stopped job, press the [Start] key.
!
Detail
A job can also be deleted from the Job List screens. For details, refer to
"To delete a job" on page 5-25.
A function other than a copy function cannot be selected while pages are
being scanned for copying, while copy scanning is paused, or while
printing is paused.
bizhub 362/282/222
4
4-63