Auto Paper Select For Small Orig; Crease/Center Staple - Konica Minolta bizhub 362 User Manual

12

Auto Paper Select for Small Orig.

Tab
5/6

Crease/Center Staple

Tab
5/6
Note
The "Crease/Center Staple" parameter appears only if optional finisher or
saddle stitcher is installed.
12-20
Parameter Description
Auto Paper Select Select whether or not to specify a paper
for Small Original tray when the "Auto Paper Select" set-
ting is selected and either no document
is placed on the original glass or the doc-
ument placed on the original glass is
smaller than A5.
• ON:
• Prohibit Copy:
Parameter Description
Crease/ Specify the crease and center staple po-
Center Staple sition for each paper size.
Select a paper size to be set, and then
touch [Enter].
• Crease:
• Center Staple:
Copies are produced using the paper
given priority.
The screen for selecting a paper tray
is displayed.
Specify the position of the fold (be-
tween -10 and +10).
Specify the position of the center sta-
ple (between -10 and +10).
Utility mode
Default setting
ON
Default setting
Crease: 0
Center Staple: 0
bizhub 362/282/222