4
Typing in the zoom ratio
By using the keypad, a zoom ratio between e0.250 and e4.000 can be typed
in directly without changing the height-to-width ratio.
1
In the Basics screen, touch [Zoom].
The Zoom screen appears.
2
Touch [XY Zoom].
The XY Zoom screen appears.
3
Using the keypad, type in the desired
zoom ratio.
–
If a value outside the allowable
range is specified, the message
"Input Error" appears. Type a
value within the allowable range.
–
If the value was incorrectly
entered, press the [C] (clear) key
in the keypad to erase the value,
and then specify the correct value.
4
Touch [Enter].
The Zoom screen appears again.
!
Detail
The enter zoom ratio can be stored. For details on storing zoom ratios,
refer to "Storing the desired zoom ratio" on page 4-38.
4-34
Basic copy operation
bizhub 362/282/222