Konica Minolta bizhub 362 User Manual page 270

8
4
Touch [Custom Size].
The Custom Size screen appears.
How can the size of paper loaded into the bypass tray be selected?
?
% For details, refer to "To specify a setting for special paper (Change
Setting)" on page 8-15.
5
Type in the length (X) and width (Y) of
the paper.
– Make sure that [X] is selected,
and then use the keypad to type
in the length of side X (between
140 mm and 432 mm).
– Touch [Y] to select it, and then
use the keypad to type in the
length of side Y (between 90 mm
and 297 mm).
– A value outside the allowable range cannot be entered.
– To change the entered value, press the [C] (clear) key, and then
enter the correct value.
Can paper sizes be stored?
?
% Two specified non-standard paper sizes can be stored. For details,
refer to "To store a non-standard paper size (Custom Size settings)"
on page 8-13.
% To recall a stored paper size, touch [1] or [2].
6
Touch [Enter].
The Paper screen appears again.
A non-standard paper size is specified.
8-12
Copy paper/original documents
bizhub 362/282/222