12
To specify a software switch setting
1
Enter Administrator mode, and then touch [Admin. 2].
2
Touch [Software SW].
The soft SW setting screen appears.
3
Touch [Mode Selection], and then
use the keypad to type in the mode
number.
4
Touch either [Bit Selection] or [HEX
Selection], and then specify the
setting.
–
To specify the bits, touch [Bit
Selection], touch
to be changed, press either the
[0] or [1] key in the keypad to
specify the bit, and then touch
[Enter].
–
To specify the hex value, touch
[HEX Selection], specify the value
by either using the keypad or
touching [A] through [F], and then
touch [Enter].
12-54
and
to move the cursor to the bit
Utility mode
bizhub 362/282/222