8
5
Touch [Size Registration].
The Size Registration screen
appears.
6
Type in the length (X) and width (Y) of
the paper.
–
Make sure that [X] is selected,
and then use the keypad to type
in the length of side X (between
140 mm and 432 mm).
–
Touch [Y] to select it, and then
use the keypad to type in the
length of side Y (between 90 mm
and 297 mm).
–
A value outside the allowable range cannot be entered.
–
To change the entered value, press the [C] (clear) key, and then
enter the correct value.
7
Touch [1] or [2] to specify where the size is to be stored.
–
If a button is pressed where no size is stored, the stored paper size
appears on the button to indicate that a size has been stored.
How is the stored paper size recalled?
?
% Touch [1] or [2] in the Custom Size screen to recall the stored paper
size.
8
Touch [Enter], and then touch [Enter] in the next screen that appears.
The Paper screen appears again.
The non-standard paper size is stored.
8-14
No program registered
Copy paper/original documents
Program registered
bizhub 362/282/222